Duke Tile Adhesive
A cement-based powder used in plastering and repairing of hairline...
Related Products:
Hover image to zoom in
A cement-based powder used in plastering and repairing of hairline cracks of concrete surfaces. With excellent adhesion to concrete. Easy to apply and sand.
Recommended For:
Exterior and interior plastering and patching of cement surfaces
Application Method
| Coverage | 1mm thickness : 20 sqm
2mm thickness : 10 sqm |
| Color | White and Gray |
| Appearance | Powder |
| Drying Time | 24-48 hours |
| Mixing Ratio | Skim Coat : 1 bag (20kgs)
Tap Water : 7-8 Liters |
| Pot Life | 3-5 hours |
| Method of Application | Trowel / Putty Knife |
| Packaging | 20kgs / bag |
Mechanical Properties
| Compressive Strength (ASTM C-109) | 800 psi |
Surface Preparation
Surface must be free of oil, dust, grease and other contaminants
Application
- Mix 1 bag of skim coat into 7-8 Liters of water. Mix thouroughly until all powder has been wet.
- Damp the substrate with water.
- Apply the mixed material onto the surface using trowel of pallet knife.
- Apply another layer if the first application has been set or wait until 1 hour.
- Use a coarse grit sandpaper for the first sanding.
Safety Precautions
Thoroughly wash hands after application. Avoid contact with eyes and skin. Wear suitable protective clothing such as overalls,
gloves and goggles. Use a dust mask/particulate respirator if applying by spray.
| Eyes | In the event of accidental splashes, flush eyes with warm water immediately. Then seek medical advice. |
| Skin | Wash skin thoroughly with soap and water. |
| Inhalation | Move to fresh air, loosen collar and keep patient rested. |
| Ingestion | In case of accidental ingestion, DO NOT INDUCE VOMITING. Obtain immediate medical attention. |